Smithville Home

or Map

Photo Gallery

Click on the thumbnail image to see a larger image. In the viewer, start a slide show or browse through the images.

AAA Coating...
AAA Coatings, Inc. AAA Coatings, Inc.
AAA Coating...
AAA Coatings, Inc. AAA Coatings, Inc.
AAA Coating...
AAA Coatings, Inc. AAA Coatings, Inc.
AAA Coating...
AAA Coatings, Inc. AAA Coatings, Inc.
AAA Coating...
AAA Coatings, Inc. AAA Coatings, Inc.

ISO Certificate

ISO 9001 2015 Coatings

Equipment Capabilities

Equipment Capabilities

* Therma-tron-x (SST) Slide Rail Transfer System
* Rack Size: 60" width x 42" high x 30" long
* Max Load Weight: 600 lbs per load bar
* Max Load Weight: 12,000 lbs per hr
* Average Capacity: 4000 square feet per hour - 200/T
* Design Film Thickness: 16 to 23 mm

Specifications 1

Specifications

  Specification No. Status
Caterpillar

1E2732

Approved
DalmlerChrysler 

MS-PB45-2

Approved
Ford

WSB-M64J28
WSB-M64J36A1-A3
WSS-M64J38A1-A4
WSS-M64JJT39A1-A5
WSS-M64J41

Approved
Approved
Approved
Approved
Approved

General Motors

ESB-M2P185

Approved
(Toyota, Nissan, Mitsubishi)
Military

9984120
MIL-P-53084

Approved at Specific Location
Pending
Underwriters Laboratories Inc. UL1332 Recognized

Specifications 2

Specifications

Additional Specifications
Property Specification No. Status
 Color    Black, Earthtones
 Film Thickness    16-23 mm
 Gloss -  60 Degree  ASTM D523-89  50 - 70
 Pencil Hardness  ASTM D3363-92A  2H+
 Direct Impact  ASTM D2794-93  100 in-lb
 Reverse Impact  ASTM D2794-93  60 in-lb
 Cross-Hatch Adhesion  ASTM D3359-95  4B - 5B
 Humidity  ASTM 1735-92  1000 Hours+
 Water Immersion  ASTM D870-92  240 Hours+
 Gravelometer  GM 9508P  6 +
 Rust Spot  GM 9632P  40   Rust Spot (Avg.)
 Throwpower  GM 9535P  12 - 15 Inches
 Cold Rolled Steel Lab Panels    
 Zinc Phosphate Pretreatment    
 0.6 Mil Average Film Thickness    
 Cure 10 Minutes @ 325 F    

Specifications 3

Specifications

     
 Corrosion Resistance    Salt Spray*
 Substrate/Pretreatment    500 Hours Salt Spray**
 Scab    1000 Hours 20 Cycle
 CRS/Zinc Phos/Chrome    0 mm 0 - 1 mm 0 - 1 mm
 CRS/Zinc Phos/Non-Chrome    0 mm 0 - 1 mm 0 - 1 mm
 CRS/Zinc Phos/DI Water    0 - 1 mm 1 - 4 mm 1 - 4 mm
 CRS/Iron Phos/Chrome    0 - 1 mm 2 - 4 mm 2 - 4 mm
 CRS/Iron Phos/Non-Chrome    1 - 3 mm 2 - 5 mm 2 - 5 mm
 CRS/Iron Phos/DI Water    2 - 5 mm 6 - 14 mm 10 - 15 mm
 CRS/Untreated    5 - 10 mm 5 - 15 mm 5 - 15 mm
 Galvanized/Zinc Phos/Chrome    --- --- 0 - 1 mm
 (Average Total Scribe Creep)    
 *Salt Spray - ASTM B117-95    
 **Cycle Scab - GM9511P    
 Cold Rolled Steel Lab Panels    
 Cure 10 Minutes @ 325F